We are here

Southern force strength Automatic Folding mask machine how to maintain?

This web news:
This network news:
  As with most mechanical devices, masks are also demand-protected, and good protection not only slows down the device's accuracy, but also reduces the chance of repair. The protection of respirator equipment is divided into the following aspects: appearance, ultrasonic system, transmission system, electrical system, pneumatic system. PS: the protection and protection of equipment is necessary after the shutdown of power
First, Appearance: Masks are we use to wear on the face, and some even to go into the operating room, so the mask machine every day to clean.
  To be able to work on the day after the shutdown of the machine after the operation of the equipment on the table, the plate holding masks clean, not water, can not use oil, can use alcohol and other volatile cleaning liquid.
  Second, ultrasonic system: (By ultrasonic electric box, ultrasonic transducer, welding head, connecting wiring composition) To see if the ultrasonic system is clean, ultrasonic electric box, ultrasonic transducer (vibrator), welding head (mold) clean can not have water, the connection line is strong. Always check the wear of ultrasonic welding head (die).
Check the ultrasonic electric box on the voltage meter and ammeter pointer is normal.
  Folding Mask Machine
  Third, the transmission system: Transmission system contains motor, gear, reducer, sprocket, chain, conveyor belts and other components, Bethlehem Mechanical Mask Machine maintenance needs to see if there is dust on the surface of the motor and other things affect the heat dissipation, gear, sprocket oil, is not attached. Whether the chain tightness is suitable for foreign bodies, the connection screws of the transmission parts are loose and so on. is the lubricating oil of the reducer enough?
  Replacement lubricants are usually required at 1000 hours-1500 hours.
  Four, the electrical system: Check the folding mask machine circuit connectors are loose, the main power cord, branch signal line, etc. wear? Aging? Loose?
  The inside of the electric box is not clean monotonous, exhaust fan is normal operation and so on.
  Five: Pneumatic system: (by the gas source filtration system, trachea, cylinder composition) Air filtration To see if there is water? (Air compressor water release: Humidity large area to the air compressor to water every day). See if there is a leak in the trachea? Does the cylinder have a leak?
  Cylinder magnetic sensor azimuth and operation is normal. Other: equipment can not contact with corrosive liquids and objects, such as: sweat easily lead to equipment parts rust.
  Equipment for a long time not to use, to the mask machine transmission system and rust-resistant parts wipe rust-resistant oil. Folding Mask machine manufacturers to be required to the folding mask machine protection, not only to be able to reduce the number of mask machine repair, but also to improve the operation of the face mask machine, and then supply the production power of the enterprise.First, Appearance: Masks are we use to wear on the face, and some even to go into the operating room, so the mask machine every day to clean.
  To be able to work on the day after the shutdown of the machine after the operation of the equipment on the table, the plate holding masks clean, not water, can not use oil, can use alcohol and other volatile cleaning liquid.
  Second, ultrasonic system: (By ultrasonic electric box, ultrasonic transducer, welding head, connecting wiring composition) To see if the ultrasonic system is clean, ultrasonic electric box, ultrasonic transducer (vibrator), welding head (mold) clean can not have water, the connection line is strong. Always check the wear of ultrasonic welding head (die).
Check the ultrasonic electric box on the voltage meter and ammeter pointer is normal.
  Folding Mask Machine
  Third, the transmission system: Transmission system contains motor, gear, reducer, sprocket, chain, conveyor belts and other components, Bethlehem Mechanical Mask Machine maintenance needs to see if there is dust on the surface of the motor and other things affect the heat dissipation, gear, sprocket oil, is not attached. Whether the chain tightness is suitable for foreign bodies, the connection screws of the transmission parts are loose and so on. is the lubricating oil of the reducer enough?
  Replacement lubricants are usually required at 1000 hours-1500 hours.
  Four, the electrical system: Check the folding mask machine circuit connectors are loose, the main power cord, branch signal line, etc. wear? Aging? Loose?
  The inside of the electric box is not clean monotonous, exhaust fan is normal operation and so on.
  Five: Pneumatic system: (by the gas source filtration system, trachea, cylinder composition) Air filtration To see if there is water? (Air compressor water release: Humidity large area to the air compressor to water every day). See if there is a leak in the trachea? Does the cylinder have a leak?
  Cylinder magnetic sensor azimuth and operation is normal. Other: equipment can not contact with corrosive liquids and objects, such as: sweat easily lead to equipment parts rust.
  Equipment for a long time not to use, to the mask machine transmission system and rust-resistant parts wipe rust-resistant oil. Folding Mask machine manufacturers to be required to the folding mask machine protection, not only to be able to reduce the number of mask machine repair, but also to improve the operation of the face mask machine, and then supply the production power of the enterprise.First, Appearance: Masks are we use to wear on the face, and some even to go into the operating room, so the mask machine every day to clean.
  To be able to work on the day after the shutdown of the machine after the operation of the equipment on the table, the plate holding masks clean, not water, can not use oil, can use alcohol and other volatile cleaning liquid.
  Second, ultrasonic system: (By ultrasonic electric box, ultrasonic transducer, welding head, connecting wiring composition) To see if the ultrasonic system is clean, ultrasonic electric box, ultrasonic transducer (vibrator), welding head (mold) clean can not have water, the connection line is strong. Always check the wear of ultrasonic welding head (die).
Check the ultrasonic electric box on the voltage meter and ammeter pointer is normal.
  Folding Mask Machine
  Third, the transmission system: Transmission system contains motor, gear, reducer, sprocket, chain, conveyor belts and other components, Bethlehem Mechanical Mask Machine maintenance needs to see if there is dust on the surface of the motor and other things affect the heat dissipation, gear, sprocket oil, is not attached. Whether the chain tightness is suitable for foreign bodies, the connection screws of the transmission parts are loose and so on. is the lubricating oil of the reducer enough?
  Replacement lubricants are usually required at 1000 hours-1500 hours.
  Four, the electrical system: Check the folding mask machine circuit connectors are loose, the main power cord, branch signal line, etc. wear? Aging? Loose?
  The inside of the electric box is not clean monotonous, exhaust fan is normal operation and so on.
  Five: Pneumatic system: (by the gas source filtration system, trachea, cylinder composition) Air filtration To see if there is water? (Air compressor water release: Humidity large area to the air compressor to water every day). See if there is a leak in the trachea? Does the cylinder have a leak?
  Cylinder magnetic sensor azimuth and operation is normal. Other: equipment can not contact with corrosive liquids and objects, such as: sweat easily lead to equipment parts rust.
  Equipment for a long time not to use, to the mask machine transmission system and rust-resistant parts wipe rust-resistant oil. Folding Mask machine manufacturers to be required to the folding mask machine protection, not only to be able to reduce the number of mask machine repair, but also to improve the operation of the face mask machine, and then supply the production power of the enterprise.First, Appearance: Masks are we use to wear on the face, and some even to go into the operating room, so the mask machine every day to clean.
  To be able to work on the day after the shutdown of the machine after the operation of the equipment on the table, the plate holding masks clean, not water, can not use oil, can use alcohol and other volatile cleaning liquid.
  Second, ultrasonic system: (By ultrasonic electric box, ultrasonic transducer, welding head, connecting wiring composition) To see if the ultrasonic system is clean, ultrasonic electric box, ultrasonic transducer (vibrator), welding head (mold) clean can not have water, the connection line is strong. Always check the wear of ultrasonic welding head (die).
Check the ultrasonic electric box on the voltage meter and ammeter pointer is normal.
  Folding Mask Machine
  Third, the transmission system: Transmission system contains motor, gear, reducer, sprocket, chain, conveyor belts and other components, Bethlehem Mechanical Mask Machine maintenance needs to see if there is dust on the surface of the motor and other things affect the heat dissipation, gear, sprocket oil, is not attached. Whether the chain tightness is suitable for foreign bodies, the connection screws of the transmission parts are loose and so on. is the lubricating oil of the reducer enough?
  Replacement lubricants are usually required at 1000 hours-1500 hours.
  Four, the electrical system: Check the folding mask machine circuit connectors are loose, the main power cord, branch signal line, etc. wear? Aging? Loose?
  The inside of the electric box is not clean monotonous, exhaust fan is normal operation and so on.
  Five: Pneumatic system: (by the gas source filtration system, trachea, cylinder composition) Air filtration To see if there is water? (Air compressor water release: Humidity large area to the air compressor to water every day). See if there is a leak in the trachea? Does the cylinder have a leak?
  Cylinder magnetic sensor azimuth and operation is normal. Other: equipment can not contact with corrosive liquids and objects, such as: sweat easily lead to equipment parts rust.
  Equipment for a long time not to use, to the mask machine transmission system and rust-resistant parts wipe rust-resistant oil. Folding Mask machine manufacturers to be required to the folding mask machine protection, not only to be able to reduce the number of mask machine repair, but also to improve the operation of the face mask machine, and then supply the production power of the enterprise.

All copyright belongs to theDG SOUTH NEKON CO.,LTDhttp://www.dgnekon.com